Severity Medium
P2575

P2575: Direct Ozone Reduction Catalyst Deterioration Sensor Circuit High

📅 Last reviewed: July 2026
What does the P2575 code mean?

The P2575 code indicates that the Powertrain Control Module (PCM) has detected a high voltage signal from the direct ozone reduction catalyst deterioration sensor circuit. This sensor monitors the efficiency of the catalyst in reducing ozone (O3) emissions. A high voltage reading typically suggests a short to voltage, open circuit, or a faulty sensor. This can lead to increased emissions and potential failure of emissions-related components.

Medium
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Use an OBD2 scanner to confirm the code and check for other related codes.

2

Step 2: Visually inspect the sensor and its wiring for damage, corrosion, or loose connections.

3

Step 3: Test the sensor's voltage and resistance with a multimeter; compare to manufacturer specifications.

4

Step 4: If sensor and wiring are okay, perform a circuit continuity test to identify shorts or opens.

5

Step 5: Replace the sensor if faulty; clear codes and test drive to verify repair.

4. Frequently Asked Questions

Is it safe to drive with this code?

Yes, it is generally safe to drive, but the vehicle may fail an emissions test and the Check Engine Light will remain on. It is recommended to diagnose and repair the issue promptly to avoid potential damage to the catalytic converter.

How much does it cost to fix?

The cost typically ranges from $50 to $150 for parts and labor, depending on the sensor price and labor rates. DIY replacement can be cheaper, but professional diagnosis may add cost.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P2575? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →