Severity Medium
P092B

Gear Shift Lock Solenoid/Actuator Control Circuit Range/Performance

📅 Last reviewed: July 2026
What does the P092B code mean?

The P092B code indicates that the powertrain control module (PCM) has detected a range or performance issue in the gear shift lock solenoid/actuator control circuit. This solenoid prevents the shifter from moving out of Park unless the brake pedal is pressed. A fault in this circuit can cause the shifter to be stuck in Park or allow shifting without brake application, posing a safety risk.

Medium
Severity
$50-$150
Typical Cost
High
Frequency

1. Symptoms You Will Notice

2. Most Common Causes

3. Step-by-Step Diagnosis

1

Step 1: Scan for codes and verify P092B is present. Check for related codes like P092A or P092C.

2

Step 2: Inspect brake pedal position switch operation and circuit continuity.

3

Step 3: Test the gear shift lock solenoid resistance and power/ground at the connector.

4

Step 4: Check fuses and relays related to the shift lock system.

5

Step 5: Visually inspect wiring and connectors for damage, corrosion, or loose connections.

4. Frequently Asked Questions

Is it safe to drive with this code?

No, it is not safe. The vehicle may shift out of Park unexpectedly or get stuck in Park, increasing the risk of an accident. Have it diagnosed and repaired immediately.

How much does it cost to fix?

The typical repair cost ranges from $50 to $150 for parts and labor, depending on the exact cause (e.g., solenoid replacement vs. wiring repair).

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P092B? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →