Severity Low
U0263

Lost Communication with Voice Recognition Module

๐Ÿ“… Last reviewed: July 2026
What does the U0263 code mean?

The U0263 code indicates that a master control module (such as the BCM, infotainment module, or gateway) has detected a loss of communication with the Speech Recognition Module (SRM) over the vehicle's serial data bus, typically CAN or LIN. This interruption prevents the exchange of status messages and commands between the SRM and the rest of the network, disabling voice control functions. The fault is limited to comfort and multimedia systems and does not directly affect propulsion, braking, or active safety systems.

Low
Severity
Variable
Typical Cost
Low
Frequency

1. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for other communication-related codes to identify the affected network

2

Inspect the SRM connector for damage, corrosion, or loose pins; check wiring for opens or shorts

3

Verify power and ground at the SRM connector

4

Test bus resistance and signal integrity at the SRM with a multimeter or oscilloscope

5

If all else is normal, attempt to reprogram or replace the SRM

5. Frequently Asked Questions

Is it safe to drive?โ–ผ

Yes, it is safe to drive. The code only affects voice control and comfort features; the vehicle's drivetrain, brakes, and safety systems remain fully operational.

How much does it cost to fix?โ–ผ

The repair cost typically ranges from $100 to $600, depending on whether the issue is a wiring repair (low end) or SRM replacement (high end). Diagnostic fees may add $100โ€“$200.

6. Related Codes

Need an OBD2 Scanner for the U0263? Compare the best scanners compatible with all vehicles
๐Ÿ›’ View OBD2 Scanners โ†’