Severity Medium
U0192

Lost Communication with Personal Computer Module

📅 Last reviewed: July 2026
What does the U0192 code mean?

Diagnostic trouble code U0192 indicates that the powertrain control module (PCM) or another critical module has lost communication with the vehicle's personal computer module. This occurs when a transmitting module does not receive an acknowledgment (ACK) message from the receiving module on the controller area network (CAN) bus within the manufacturer's specified time and number of attempts. The loss of communication can be due to a data network fault, physical disconnection of the module, or an internal failure within the personal computer module.

Medium
Severity
Variable
Typical Cost
Medium
Frequency

1. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for all stored codes and freeze frame data

2

Inspect CAN bus wiring and connectors for damage, corrosion, or loose connections

3

Check voltage supply and ground at the personal computer module

4

Test CAN bus High and Low circuits for shorts or opens

5

Verify communication with other modules; if only the personal computer module is missing, suspect a module fault

6

If necessary, replace the personal computer module and reprogram

5. Frequently Asked Questions

Is it safe to drive?

The severity is medium. You may be able to drive short distances, but drivability issues or a no-start condition can occur. It is recommended to diagnose and repair promptly.

How much does it cost to fix?

Costs vary widely: from $100-$200 for wiring repairs to $500-$1,500+ for module replacement and programming.

6. Related Codes

Need an OBD2 Scanner for the U0192? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →