Severity High
P3467

Cylinder 9 Deactivation/Intake Valve Control Circuit Low

📅 Last reviewed: July 2026
What does the P3467 code mean?

The P3467 code indicates that the powertrain control module (PCM) has detected a low voltage condition in the cylinder 9 deactivation/intake valve control circuit. This circuit is responsible for controlling the oil flow to the valve lifters that deactivate the cylinder under light load to improve fuel economy. A low voltage reading suggests a short to ground, open circuit, or faulty component in the solenoid or wiring.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan for additional codes and record freeze frame data.

2

Step 2: Visually inspect the wiring and connector for cylinder 9 deactivation solenoid for damage, corrosion, or loose connections.

3

Step 3: Use a multimeter to check the solenoid resistance (typically 10-20 ohms) and compare to specifications.

4

Step 4: Check for voltage at the solenoid connector with the engine running; should be near battery voltage.

5

Step 5: If voltage is low, check for shorts or opens in the circuit between the PCM and solenoid.

6

Step 6: If circuit tests OK, replace the cylinder deactivation solenoid on cylinder 9.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances as the engine may misfire, reducing fuel economy and potentially causing catalytic converter damage. Short trips to a repair shop are acceptable.

How much does it cost to fix?

The cost typically ranges from $50 to $150 for diagnosis and repair, including parts and labor. The solenoid itself is relatively inexpensive.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P3467? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →