Severity Medium
P2768

P2768 - Input/Turbine Speed Sensor Circuit Intermittent

📅 Last reviewed: July 2026
What does the P2768 code mean?

The P2768 code indicates that the powertrain control module (PCM) has detected an intermittent signal from the input/turbine speed sensor, which monitors the rotational speed of the transmission's input shaft. This sensor is critical for proper transmission shift timing and torque converter clutch operation. An intermittent circuit fault can cause erratic shifting, poor fuel economy, and potential transmission damage if not addressed.

Medium
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan for additional codes and record freeze frame data.

2

Step 2: Inspect the sensor and wiring for damage, corrosion, or loose connections.

3

Step 3: Check transmission fluid level and condition; top off or replace if necessary.

4

Step 4: Test sensor resistance and signal output with a multimeter; compare to manufacturer specs.

5

Step 5: If sensor and wiring are good, perform a transmission mechanical inspection.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances with this code, as intermittent sensor failure can lead to harsh shifting or transmission damage. Have it diagnosed promptly.

How much does it cost to fix?

Repair costs typically range from $50 to $150 for sensor replacement, but may be higher if wiring repairs or transmission work is needed.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P2768? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →