Severity High
P2735

Pressure Control Solenoid Intermittent

📅 Last reviewed: July 2026
What does the P2735 code mean?

The P2735 code indicates an intermittent fault in the pressure control solenoid circuit, which regulates transmission line pressure. This solenoid receives a variable voltage from the transmission control module (TCM) to adjust hydraulic pressure for smooth shifting. An intermittent signal suggests a loose connection, damaged wiring, or a failing solenoid that works sporadically, leading to unpredictable transmission behavior.

High
Severity
$150-$400
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan the vehicle for all stored codes and freeze frame data.

2

Step 2: Inspect transmission fluid level and condition; top off or replace if necessary.

3

Step 3: Visually check wiring and connectors to the pressure control solenoid for damage, corrosion, or loose pins.

4

Step 4: Use a multimeter to test solenoid resistance and compare to manufacturer specs.

5

Step 5: Perform a solenoid actuation test with a scan tool to verify operation.

6

Step 6: If intermittent, wiggle test wiring while monitoring solenoid signal to isolate the fault.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances as intermittent solenoid operation can cause sudden transmission failure or unsafe driving conditions. Limp mode may limit speed and damage the transmission.

How much does it cost to fix?

Repair costs typically range from $150 to $400, including parts (solenoid $50-$150) and labor ($100-$250). If the TCM is faulty, costs can exceed $800.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P2735? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →