Severity High
P1272

P1272: Cylinder #2 Injector Circuit Open (High to Low Side)

📅 Last reviewed: July 2026
What does the P1272 code mean?

The P1272 code indicates an open circuit between the high and low sides of the fuel injector for cylinder #2. This typically means the injector coil has failed (open circuit), or there is a wiring/connector issue in the injector circuit. The ECM monitors the injector driver circuit and detects an abnormal voltage drop or lack of current flow, triggering this code. This can cause a misfire, rough idle, and reduced engine performance.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Symptoms You Will Notice

2. Most Common Causes

3. Step-by-Step Diagnosis

1

Step 1: Scan for codes and record freeze frame data.

2

Step 2: Visually inspect injector #2 connector and wiring for damage or corrosion.

3

Step 3: Measure resistance across injector #2 terminals (should be 11-16 ohms). If open, replace injector.

4

Step 4: Check for 12V at injector #2 with key on, engine off. If no voltage, check wiring and fuse.

5

Step 5: Use a noid light to test injector pulse while cranking. If no flash, suspect wiring or ECM issue.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive with this code as it can cause a misfire, reduced engine performance, and potential damage to the catalytic converter due to unburned fuel.

How much does it cost to fix?

The cost to fix P1272 typically ranges from $50 to $150 for a DIY injector replacement, or $150 to $400 if professionally diagnosed and repaired, including parts and labor.

5. Commonly Affected Makes

This is a manufacturer-specific code. The exact manufacturer is not confirmed in our current database.

6. Related Codes

Need an OBD2 Scanner for the P1272? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →