Severity High
P0B6C

Hybrid Battery Voltage Sense Circuit Intermittent/Erratic

📅 Last reviewed: July 2026
What does the P0B6C code mean?

The P0B6C code indicates an intermittent or erratic signal from the hybrid battery voltage sense circuit. This circuit monitors the voltage of the high-voltage hybrid battery pack. An intermittent fault may be caused by loose connections, corroded terminals, damaged wiring, or a failing battery sensor. This can lead to inaccurate battery state-of-charge readings, affecting hybrid system operation and potentially triggering warning lights.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Symptoms You Will Notice

2. Most Common Causes

3. Step-by-Step Diagnosis

1

Step 1: Use a scan tool to retrieve all codes and freeze frame data.

2

Step 2: Visually inspect the hybrid battery voltage sense wiring and connectors for damage, corrosion, or looseness.

3

Step 3: Perform a wiggle test on the wiring harness while monitoring voltage readings with a multimeter to identify intermittent faults.

4

Step 4: Check the hybrid battery voltage sensor resistance and compare to manufacturer specifications.

5

Step 5: If no issues found, clear the code and test drive to see if it returns.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive with this code as it can cause inaccurate battery monitoring, potentially leading to reduced performance or unexpected shutdown. Have the vehicle inspected promptly.

How much does it cost to fix?

The cost typically ranges from $50 to $150 for diagnosis and repair, depending on the cause. Simple connector cleaning may be cheap, while sensor replacement can be higher.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P0B6C? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →