Severity High
P06C2

Cylinder 10 Glow Plug Circuit Range/Performance

📅 Last reviewed: July 2026
What does the P06C2 code mean?

The P06C2 code indicates that the Engine Control Module (ECM) has detected a performance or range issue in the glow plug circuit for cylinder 10. This typically means the glow plug resistance is out of specification, the circuit has an open or short, or the glow plug control module is malfunctioning. In diesel engines, glow plugs preheat the combustion chamber for cold starts; a fault can cause hard starting, misfires, and increased emissions.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan for codes and record freeze frame data. Clear code and test drive to see if it returns.

2

Step 2: Visually inspect the glow plug wiring and connector for cylinder 10 for damage, corrosion, or loose connections.

3

Step 3: Measure resistance of glow plug at cylinder 10; compare to manufacturer specs (typically 0.5-2 ohms).

4

Step 4: Check voltage at glow plug connector during glow plug activation; should be battery voltage.

5

Step 5: Test glow plug control module/relay for proper operation and output to cylinder 10 circuit.

4. Frequently Asked Questions

Is it safe to drive with this code?

You can drive short distances in mild weather, but avoid cold starts and heavy loads. The vehicle may be hard to start and could misfire, potentially causing catalytic converter damage. It's best to repair promptly.

How much does it cost to fix?

Replacing a single glow plug costs $50-$150 including parts and labor. If the control module or wiring needs repair, costs can be higher.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P06C2? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →