Severity High
P069E

Fuel Pump Control Module Requested MIL Illumination

📅 Last reviewed: July 2026
What does the P069E code mean?

The P069E code indicates that the fuel pump control module (FPCM) has detected a fault and requested the powertrain control module (PCM) to illuminate the malfunction indicator lamp (MIL). This typically points to an issue within the fuel pump control circuit, such as a faulty FPCM, wiring problems, or a defective fuel pump. The FPCM monitors fuel pump operation and if it sees abnormal voltage, current, or communication errors, it triggers this code.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan for additional codes and freeze frame data to identify related issues.

2

Step 2: Inspect the fuel pump control module and wiring for damage, corrosion, or loose connections.

3

Step 3: Test fuel pump operation by listening for prime on key-on or checking fuel pressure.

4

Step 4: Use a multimeter to check power, ground, and signal circuits at the FPCM connector.

5

Step 5: If all else is normal, replace the fuel pump control module and clear codes.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended. The vehicle may stall or fail to start, posing a safety risk. Have it diagnosed promptly.

How much does it cost to fix?

Diagnosis typically costs $50-$150. Repair costs vary: a fuel pump control module replacement can be $200-$400, while wiring repairs may be less.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P069E? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →