Severity High
P0607

P0607 - Control Module Performance Issue

📅 Last reviewed: July 2026
What does the P0607 code mean?

The P0607 code indicates that the powertrain control module (PCM) has detected an internal performance fault, often due to voltage irregularities, software glitches, or hardware failure. This can affect engine management, transmission control, and other critical systems, leading to drivability issues.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Scan for additional codes and freeze frame data to identify related issues.

2

Step 2: Check battery voltage and charging system; ensure battery is fully charged and alternator output is within spec.

3

Step 3: Inspect all PCM grounds and power connections for corrosion, looseness, or damage.

4

Step 4: Clear the code and test drive to see if it returns; if persistent, perform a PCM software update or reprogramming.

5

Step 5: If all else fails, replace the PCM and reprogram it with the correct vehicle calibration.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive with P0607 as it can cause sudden stalling or loss of power, leading to unsafe driving conditions. Have the vehicle diagnosed and repaired promptly.

How much does it cost to fix?

Diagnosis typically costs $50-$150. If PCM replacement is needed, parts and labor can range from $500 to $1,500 depending on the vehicle.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P0607? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →