Severity Medium
P024E

Charge Air Cooler Bypass Position Sensor Circuit Low

📅 Last reviewed: July 2026
What does the P024E code mean?

The P024E code indicates that the Engine Control Module (ECM) has detected a low voltage signal from the charge air cooler bypass position sensor. This sensor monitors the position of the bypass valve in the charge air cooler system, which regulates intake air temperature and pressure. A low circuit condition typically means the sensor signal is below the expected range, often due to a short to ground, faulty sensor, or wiring issues. This can lead to improper bypass valve operation, affecting engine performance and emissions.

Medium
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Use an OBD2 scanner to confirm code P024E and check for other related codes.

2

Step 2: Visually inspect the sensor and wiring for damage, corrosion, or loose connections.

3

Step 3: Test sensor voltage and ground circuits with a multimeter; compare to manufacturer specs.

4

Step 4: If sensor is faulty, replace it; if wiring issue, repair as needed.

5

Step 5: Clear codes and test drive to verify repair.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances as it can cause reduced engine performance and potential damage to other components. Have it diagnosed promptly.

How much does it cost to fix?

The cost typically ranges from $50 to $150 for parts and labor, depending on the cause and vehicle model.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P024E? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →