Severity High
P0092

Fuel Pressure Regulator 1 Control Circuit High

📅 Last reviewed: July 2026
What does the P0092 code mean?

The P0092 code indicates that the Engine Control Module (ECM) has detected a high voltage signal from the fuel pressure regulator control circuit. This typically means the circuit voltage is above the expected range, often due to a short to power, a faulty fuel pressure regulator solenoid, or an issue with the ECM itself. The fuel pressure regulator controls fuel rail pressure by adjusting the fuel return flow; a high circuit condition can cause improper fuel pressure, leading to drivability issues.

High
Severity
$50-$150
Typical Cost
High
Frequency

1. Most Common Causes

2. Symptoms You Will Notice

3. Step-by-Step Diagnosis

1

Step 1: Use a scan tool to retrieve the code and freeze frame data.

2

Step 2: Visually inspect the wiring and connectors for damage, corrosion, or shorts.

3

Step 3: Test the fuel pressure regulator solenoid resistance and compare to specs.

4

Step 4: Check for voltage at the regulator control circuit with key on; should be within range.

5

Step 5: If wiring and solenoid are okay, test the ECM output or replace the ECM.

4. Frequently Asked Questions

Is it safe to drive with this code?

It is not recommended to drive long distances as improper fuel pressure can cause engine damage or poor performance. Have it diagnosed promptly.

How much does it cost to fix?

The cost typically ranges from $50 to $150 for diagnosis and repair, but can be higher if the ECM needs replacement.

5. Commonly Affected Makes

This is a generic OBD2 code, potentially applicable to any manufacturer using this diagnostic standard.

6. Related Codes

Need an OBD2 Scanner for the P0092? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →