Severity High
C1420

C1420 ABS Hydraulic Pressure Circuit Short to Battery

📅 Last reviewed: July 2026
What does the C1420 code mean?

The C1420 code indicates a short to battery voltage (Vbatt) in the ABS hydraulic pressure/flow circuit. This Toyota/Lexus-specific code sets when the control module detects an abnormally high voltage signal from the hydraulic pressure sensor or actuator, inconsistent with expected operating conditions. The system continuously monitors circuit integrity to ensure proper electronic brake assist functionality.

High
Severity
Variable
Typical Cost
High
Frequency

1. Commonly Affected Makes

ToyotaLexus

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for additional codes and freeze frame data

2

Visually inspect the hydraulic pressure sensor connector and wiring for damage, corrosion, or shorts

3

Measure voltage at the sensor signal wire with key on; compare to manufacturer specifications

4

Check for continuity between sensor signal circuit and battery positive circuits

5

If wiring and sensor check out, test the ABS module for internal faults

5. Frequently Asked Questions

Is it safe to drive?

No, this is a high-severity fault. Driving with a short to battery in the ABS hydraulic circuit can cause unexpected brake behavior or loss of ABS function, increasing the risk of an accident. Have the vehicle towed to a repair shop.

How much does it cost to fix?

Repair costs typically range from $200 to $800, depending on the cause. A simple wiring repair may cost $200-$400, while replacing the hydraulic pressure sensor or ABS module can run $500-$800 or more.

6. Related Codes

Need an OBD2 Scanner for the C1420? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →