Severity High
C1246

ABS Outlet Valve Circuit RR Fault

📅 Last reviewed: July 2026
What does the C1246 code mean?

The C1246 code indicates a fault in the ABS outlet valve solenoid circuit for the right rear wheel. This valve is part of the ABS hydraulic control module and modulates brake pressure during emergency braking. The ABS module detects an open circuit, short circuit, or abnormal resistance in the solenoid coil, preventing proper pressure control. As a safety measure, the system disables ABS, traction control, and vehicle stability control.

High
Severity
Variable
Typical Cost
High
Frequency

1. Commonly Affected Makes

ToyotaLexus

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan the ABS module for codes and confirm C1246 is present

2

Visually inspect the right rear ABS valve wiring and connector for damage or corrosion

3

Measure resistance between the ABS module connector pins for the RR outlet valve; expected range is 0.8–1.6 ohms

4

Check for continuity and shorts to ground or power in the wiring harness

5

If wiring is good, test the solenoid valve directly at the hydraulic control module; if out of spec, replace the module

5. Frequently Asked Questions

Is it safe to drive?

You can still drive, but without ABS, traction control, or stability control. Braking on slippery surfaces may cause wheel lockup, increasing the risk of skidding. Have it repaired as soon as possible.

How much does it cost to fix?

Repair costs typically range from $200 to $800, depending on the cause. A simple wiring repair may cost $200–$400, while replacing the ABS hydraulic control module can run $500–$800 or more.

6. Related Codes

Need an OBD2 Scanner for the C1246? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →