Severity High
C1237

Toyota/Lexus C1237: Rear Wheel Speed Signal Loss

📅 Last reviewed: July 2026
What does the C1237 code mean?

Diagnostic trouble code C1237 indicates that the ABS or Vehicle Stability Control (VSC) module is not receiving a speed signal from one or both rear wheels. This code is specific to Toyota and Lexus vehicles and is triggered when the ABS module detects an open or short circuit in the rear wheel speed sensor circuit, a faulty sensor, or a damaged tone ring. The system relies on sine wave or Hall effect signals to determine wheel rotation speed; without this input, ABS, VSC, and sometimes traction control (TRAC) are disabled.

High
Severity
Variable
Typical Cost
High
Frequency

1. Commonly Affected Makes

ToyotaLexus

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for codes and confirm C1237 is present; check for related codes.

2

Inspect rear wheel speed sensor connectors for corrosion, damage, or loose fit.

3

Measure sensor resistance and AC voltage output while spinning the wheel; compare to specs.

4

Check wiring between sensor and ABS module for opens, shorts, or high resistance.

5

Inspect tone ring for cracks, missing teeth, or debris; ensure proper air gap.

6

If all else passes, test or replace the ABS/VSC module.

5. Frequently Asked Questions

Is it safe to drive?

Driving is possible but not recommended because ABS, VSC, and traction control will be disabled, increasing the risk of skidding or loss of control in slippery conditions. Have the issue diagnosed promptly.

How much does it cost to fix?

Repair costs typically range from $150 to $600, depending on the cause. A sensor replacement is usually $100–$300, while wiring repairs or module replacement can be higher.

6. Related Codes

Need an OBD2 Scanner for the C1237? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →