Severity Medium
B1606

B1606: Anti-Theft Indicator Circuit Short to Ground

📅 Last reviewed: July 2026
What does the B1606 code mean?

The B1606 code indicates that the Body Control Module (BCM) or Powertrain Control Module (PCM) has detected a short to ground in the control circuit for the anti-theft system indicator lamp (security light in the instrument cluster). This fault prevents the PATS (Passive Anti-Theft System) from providing visual feedback to the driver, leaving them unaware of the immobilizer status. The issue is typically caused by a wiring short, a faulty LED or bulb in the cluster, a damaged BCM driver, or corroded connectors.

Medium
Severity
Variable
Typical Cost
Medium
Frequency

1. Commonly Affected Makes

FordLincolnMercury

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for B1606 and other related codes using a compatible diagnostic tool

2

Visually inspect the anti-theft indicator circuit wiring for shorts to ground or damage

3

Test the security light bulb/LED in the instrument cluster for continuity and shorts

4

Check connectors at the BCM and instrument cluster for corrosion, bent pins, or poor contact

5

If wiring and bulb are okay, suspect a faulty BCM and perform further module testing

5. Frequently Asked Questions

Is it safe to drive?

Yes, but the vehicle may not start if the PATS immobilizer is active and the fault prevents proper communication. It is recommended to diagnose and repair the issue promptly to avoid being stranded.

How much does it cost to fix?

Repair costs typically range from $100 to $400, depending on the cause. A simple wiring repair or bulb replacement may be under $150, while BCM replacement can exceed $300 including programming.

6. Related Codes

Need an OBD2 Scanner for the B1606? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →