Severity Medium
B1553

B1553: Decklid Release Circuit Short to Battery

📅 Last reviewed: July 2026
What does the B1553 code mean?

The B1553 code indicates that the Body Control Module (BCM) or rear decklid module has detected a short to battery voltage (B+) in the decklid release solenoid/actuator control circuit. This means the signal wire to the actuator has an unwanted connection to a constant or switched power source, preventing proper control of the decklid opening. It may cause unintended decklid release or blown fuses.

Medium
Severity
Variable
Typical Cost
Medium
Frequency

1. Commonly Affected Makes

FordLincolnMercury

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Check for blown fuses related to the decklid release circuit and replace if necessary.

2

Visually inspect the wiring harness and connectors for damage, corrosion, or shorts to power.

3

Disconnect the decklid release actuator and measure for voltage on the signal wire; if battery voltage is present with the actuator disconnected, there is a short to B+ in the wiring.

4

Test the actuator by applying battery voltage directly; if it does not operate or draws excessive current, replace the actuator.

5

If wiring and actuator are good, suspect a faulty BCM or rear decklid module and perform module diagnostics.

5. Frequently Asked Questions

Is it safe to drive?

Yes, the vehicle is generally safe to drive, but the decklid may open unexpectedly or fail to open. Avoid loading items that could be damaged if the decklid opens while driving.

How much does it cost to fix?

Repair costs typically range from $100 to $400, depending on whether the issue is a simple wiring repair, actuator replacement, or module replacement.

6. Related Codes

Need an OBD2 Scanner for the B1553? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →