Severity Low
B1508

B1508: Flash-to-Pass Switch Circuit Open

📅 Last reviewed: July 2026
What does the B1508 code mean?

The B1508 code indicates that the vehicle's control module, typically the Front Electronic Module (FEM) in Ford vehicles, has detected an open circuit in the flash-to-pass switch circuit. This switch, usually located on the turn signal stalk or steering column, allows the driver to momentarily activate the high beams by pulling the stalk backward. An open circuit means there is a break in electrical continuity between the switch and the control module, preventing the activation signal from being received. The FEM monitors the circuit and sets this code when it does not detect the expected resistance or voltage from the switch loop.

Low
Severity
Variable
Typical Cost
Low
Frequency

1. Commonly Affected Makes

FordLincolnMercury

2. Most Common Causes

3. Symptoms You Will Notice

4. Step-by-Step Diagnosis

1

Scan for codes and verify B1508 is present

2

Inspect the flash-to-pass switch and its connector for damage or corrosion

3

Check continuity and resistance in the switch circuit wiring between the switch and FEM

4

Test the switch operation with a multimeter

5

Check the fuse for the switch circuit

6

If all else is okay, test the FEM or replace it if necessary

5. Frequently Asked Questions

Is it safe to drive?

Yes, it is generally safe to drive with code B1508. The only symptom is that the flash-to-pass feature may not work, but normal high beam operation via the headlight switch should still function. However, it's recommended to have it repaired for convenience and safety.

How much does it cost to fix?

The cost to fix B1508 typically ranges from $50 to $200 for a switch replacement, up to $500 or more if the FEM module needs replacement. Diagnostic fees may add $100-$150.

6. Related Codes

Need an OBD2 Scanner for the B1508? Compare the best scanners compatible with all vehicles
🛒 View OBD2 Scanners →